Table of Contents
Advertisement
3.5.6 Information Display
The Information tab enables the display of information relevant to the measurement.
The following dialog box is displayed:
This is the information entered by the administrator when configuring the device before
the measurement cycle.
No information can be entered in this dialog box.
3.5.7 Creation of an Excel Report.
Microsoft Excel is required for this operation
It is possible to create an Excel file from a measurement file.
This Excel file enables access to the information contained in the measurement files:
Serial Number and calibration dates of the dosimeter which made the measurements.
-
Name of Excel file.
-
Sample number.
-
Date and time of beginning and end of measurement recording cycle.
-
Configuration of the dosimeter during the measurement recording cycle (period and
-
duration of cycle, reference threshold for the visual alarms and configuration of the audio
and vibrating alarms.
Measurement details (sample number, date and time of measurement, battery and
-
temperature levels, field values in V/m, W/m² and in mW/cm², level relative to reference
threshold and alarm configuration at the time of measurement).
Information entered (Name of operator, place of measurement and commentaries).
-
Figure 34 : Information display
31 / 37
Advertisement
Table of Contents
