How To Recharge The Eme Guard Battery - Satimo EME Guard User Manual

Personal exposure meter
Table of Contents

Advertisement

The charger is under high voltage thus the cover must never be removed.
The charger is equipped with an interchangeable jack. Do not remove this jack or modify
the initial set up. In case of doubt, contact our after sales service.

2.6.2 How to Recharge the EME Guard Battery

Switch off the device
Open
the
cover
to
access
battery
connector.
An orange light indicates the
battery is recharging.
When recharging has finished, unplug the charger from the mains power supply before
unplugging the charger from the device.
.
fliptop
Plug the charger into
the
the EME Guard
charger
Do not plug the charger into the mains power
supply before plugging the charger into the
device.
Do not leave the charger plugged into the mains
power supply if it is not plugged into the device.
Do not leave the charger plugged into the device if
it is not plugged into the mains power supply.
A complete battery recharge takes an estimated 6
hours.
15 / 37
into the mains power
supply.
A green light indicates recharging has
.
finished
Plug the charger

Advertisement

Table of Contents
loading

Table of Contents