Table of Contents
Advertisement
There are 3 possibilities in the Administrator menu:
Login: for administrator authentification.
Logout: to exit administrator mode.
Change password: to change the password.
To log in as administrator, select the menu Administrator
The following screen appears:
On the first use, the user should enter the password provided by the head of software.
The user thus becomes administrator and can access configuration.
The administrator can then modify the password by selecting the menu Administrator
Change password.
The following screen appears:
The user should enter this new password the next time he wishes to access configuration.
3.3
C
ONFIGURING
To access the following information:
Battery level,
-
Measurement recording cycle,
-
Alarm levels,
-
information ( according to embedded software version),
-
date and time,
-
log in as administrator, connect the dosimeter to the computer and click on Configure.
Warning! After any new configuration, the EME Guard is ready to start a new cycle of
measurement recordings. Before starting a new measurement cycle, make sure the data
recorded during the previous measurement cycle have been correctly downloaded onto
your computer.
Figure 8 : Enter password
Figure 9 : Modification of password
T
D
HE
OSIMETER
18 / 37
Login.
Advertisement
Table of Contents
