Table of Contents
Advertisement
So that the EME Guard can be « worn » it is equipped with a two-part clip belt; a belt clip
which slides onto a stud situated on the back of the device.
Slide the stud horizontally into the
Pivot the dosimeter downwards.
groove.
The connectors for the battery charger and the USB are situated on the base of the
dosimeter, protected by a lid.
The following procedure must be followed when opening the lid.
apply pressure to
To open the lid:
...and lift the lid
the hinge...
Battery charger
USB connector
connector
Figure 3 : The EME Guard Dosimeter seen from below
9 / 37
Advertisement
Table of Contents
