Table of Contents
Advertisement
To display Instantaneous measurement, Mean 6mn Measurement and Display
Interruption, select the appropriate checkbox under the graph.
The different checkboxes situated in the Graph Selection dialog box enable the display of
the mean (Mean) the maximum (Max) and the minimum (Min) field measurement
values, as well as the reference threshold value (Threshold) and the thresholds for the
audio alarm (Buzzer) and vibrator alarm (Vibrator) used during measurement.
Information on a Sample:
•
It is possible to display precise information on a specific sample. The sample number, the
field value and its level in relation to the reference threshold, the date and time of
acquisition are displayed in the Sample dialog box.
Sample selection is possible in 2 ways:
Numerical list box Sample Number: the sample number can be typed in directly or
selected using the on-screen arrows or "↑" and "↓" buttons on your keyboard to increase
or decrease the number.
Cursor on the graph: position the mouse wherever required then click on the left
button of the mouse, or with the left mouse button click on the cursor and drag and drop
to its new position. The cursor will automatically fall on the nearest measurement.
Note 2 : Interaction cursor – numerical list box: the numerical list box and the position of
the cursor are linked. By modifying the measurement number in the numerical list box,
the cursor will move to this measurement. Likewise, if the cursor is moved to a
determined measurement, that measurement number will be displayed in the numerical
list box.
Zoom :
•
It is possible to zoom in between two samples. With a right click drag from the start
sample on the left, to the final sample on the right. A blue frame defines the zoom zone
on the graph.
Figure 26 : Sample Dialog Box
27 / 37
Advertisement
Table of Contents
