Information On The Measurements; Monitoring - Satimo EME Guard User Manual

3.5.1 Information on the Measurements

The dialog box on the top right of the main panel shows specific information concerning
the measurement cycle displayed on the screen:
Figure 24 : Measurement information and dosimeter configuration window
Serial number: serial number of the dosimeter
File: name of the file containing the measurements. To read the complete file path,
click to the right of the text using the right button of your mouse.
Date: start date of the measurement cycle.
Start time: start time of measurement recording cycle.
Duration: real duration of the measurement recording cycle.
Samples: number of measurements recorded during the cycle.
Period: time (in seconds) between two consecutive recordings.
Cycle: total time (in minutes) of the measurement recording cycle.
Threshold: the reference threshold for the visual alarms (in V/m).
Buzzer: operation mode and audio alarm threshold.
Vibrator: operation mode and vibrating alarm threshold.

3.5.2 Monitoring

The Monitoring tab shows the pattern of field measurements over time.
Selection of curves to be displayed:
•
By default, the graph shows the pattern of field measurements over time (instantaneous
field measurements made by the device), and thus the pattern of mean field values
calculated over the six last minutes of measurement (value calculated by EME Guard
Analysis software using those instantaneous measurements). Any interruptions to the
measurement cycle are indicated by a blue circle on the graph.
Figure 25 : Monitoring graph
26 / 37