Table of Contents
Advertisement
2.2.2 Estimation of Remaining Autonomy
The field level lights (25%, 50%, 75% and 100% lights ) enable the display of an
estimation of remaining power autonomy.
Display of Estimated Remaining Electric Autonomy
2.2.3 Starting Measurements
The light corresponding to the reference threshold defined by the user is activated.
The ON light remains on for approximately 3 seconds (the internal function parameters
are activated.)
Measurements are then taken every second. The ON light flashes every time a
measurement is taken.
The different alarms (visual, audio, vibrating) are updated upon each measurement (every
second). Recordings can be made at a different rhythm.
2.3
L
B
OW
ATTERY
When the battery is too low to give accurate readings, the measurements stop
automatically and the BATT. light flashes indicating that the battery must be recharged.
Pushing the ON / OFF button will stop the device.
Connecting the device to a computer (USB) will stop the device
Note 1 : If the battery continues to weaken, the BATT. light will switch off automatically
when the energy level is insufficient to power the device.
>72 hours
>36 hours
<18 hours
13 / 37
>54 hours
>18 hours
If the battery power is insufficient
to
give
accurate
BATT. light flashes. (see 2.3 Low
Battery)
readings,
the
Advertisement
Table of Contents
