Displaying Arp Entries - Digisol DG-FS4526E Management Manual

C 16 | IP Configuration
HAPTER
Address Resolution Protocol
D ARP
ISPLAYING
E
NTRIES
W I
EB NTERFACE
To configure the timeout for the ARP cache:
1. Click IP, ARP.
2. Select Configure General from the Step List.
3. Set the timeout to a suitable value for the ARP cache.
4. Click Apply.
Figure 289: Setting the ARP Timeout
Use the IP > ARP (Show Information) page to display dynamic entries in
the ARP cache. The ARP cache contains entries for local interfaces, including
subnet, host, and broadcast addresses. These entries are dynamically
learned through replies to broadcast messages.
CLI R
EFERENCES
"show arp" on page 1098
"clear arp-cache" on page 1098
W I
EB NTERFACE
To display all entries in the ARP cache:
1. Click IP, ARP.
2. Select Show Information from the Step List.
Figure 290: Displaying ARP Entries
– 488 –