Using Call Waiting - Motorola Satellite Series 9500 User Manual

Using Call Waiting

Some
Tip:
network
features may
not be available
until First
Quarter 1999.
Check with your
service
provider.
50 Using Your Phone
You must subscribe to this network feature through
your service provider(s).
+ Iridium Satellite Mode
If you have subscribed to Call Waiting, you must first
activate it through the Option menu (see page 100).
After you activate Call Waiting, you are notified of
incoming calls while you are on the line in two ways.
When a call comes in, you hear a beep and see the
message Call Waiting
If you want to...
accept the waiting call
reject the waiting call
end current call before
answering the waiting
call
Non-GSM Cellular Mode
Non-GSM cellular users who have subscribed to
this feature, are notified of an incoming call by two
beeps. You may see a visual message, depending
on your service provider.
To handle the call waiting, you must send a phone
flash along with the appropriate feature code
provided by your service provider. The current call
is put on hold. To return to your initial, call you must
send another phone flash. See "Sending a Phone
Flash" on page 54 for details.
followed by Answer?
Then...
O
.
Press
Your current call is placed on
hold.
C
.
Press
M
Press . You will see
1.
End Active Call?
O
.
Press Your phone
2.
rings and can now be
answered normally.
.