Selecting Manual Modes - Motorola Satellite Series 9500 User Manual

Portable phone
Hide thumbs Also See for Satellite Series 9500:
Table of Contents

Advertisement

1-2: Getting to Mode Selection Features...
1.
Press
2.
Press

Selecting Manual Modes

You must
Tip:
have a cellular
cassette
installed in your
phone for this
feature to work
properly.
150
Selecting a Mode
M
until you see
M
to scroll to one of the features described below.
If you select an "always" mode, your phone always
accesses that type of service. If you become out-of-
range in that mode, the phone does not switch to
the other type of service. You have to manually
switch it to the other mode by changing the settings
in this menu.
Select Cellular Always Mode
If you select this feature, your system always
accesses the cellular network.
1. Follow the steps in the "Getting to..." box
to get to
2. Press
If you see the message
Insert Cassette
Cassette is installed properly. If you see
Cassette See Supplier
service provider.
3. Press and hold
Select Satellite Always Mode
If you select this feature, your system always
accesses the Iridium satellite network. When you
are in Iridium satellite mode, you will see the +
indicator in the lower left corner of your display.
1. Follow the steps in the "Getting to..." box
to get to
2. Press
3. Press and hold
Mode Selection
Cellular Always
O
to select.
make sure your Cellular
C
to exit the menu.
Satellite Always
O
to select.
C
to exit the menu.
, and then press
.
Check Cassette
, contact your
.
O
.
or
Bad

Advertisement

Table of Contents
loading

Table of Contents