Placing Calls - Motorola Satellite Series 9500 User Manual

Placing Calls

To place a call, your phone must be powered on
and in contact with the satellite or cellular network
(depending on your mode). See "Accessing the
Network" on page 137 for network information.
Dial a Number
1. Rotate and fully extend the antenna of the
portable phone. Make sure the antenna has a
clear view of the sky (Iridium satellite mode
only).
2. Open the keypad cover to expose the
keypad.
3. Enter the number using the digit keys. As
soon as you begin entering digits, you will
see Call?
When you are in Iridium satellite mode, to dial
a number, you must enter the phone number
in international format: [international access
code or +] [country code] [phone number]
O
4. Press
+18475551234
You will see either the flashing message
Calling
followed by
plays a setup tone.
.
. You will see Calling
.
or the flashing messages
Registering
Calling
, and the phone
Using Your Phone
If you make
Tip:
a mistake,
C
press
to delete the
last digit, or
press and hold
C
to clear all
digits.
The
Tip:
international
,
access code
from the Iridium
satellite network
is 00 or +.
once
43