Deleting All Cid Records; Dialing Back; If You Have Programmed Your Local Area Code; If You Have Not Programmed Your Local Area Code - Motorola ML25260 Full User Manual

11.4

Deleting All CID Records

This feature allows you to clear all CID records at once.
1. While viewing a CID record, press and hold DELETE.
2. The screen will display
YES
3. Press softkey to confirm. The screen will display
11.5

Dialing Back

When viewing CID records, you can dial back the numbers showing on the display by pressing s,
HEADSET, a LINE button, or pick up the corded handset.
11.5.1

If you have programmed your local area code

1. In idle mode, press
2. If the CID record shows a 7-digit number (i.e. 555-1234), then the call was received from within
your area code. However, this does not guarantee the call is a local call.
If the CID record shows an 11-digit number (i.e. 1-234-555-1234), then the call received was not
from your area code.
3. To adjust the phone number format, press
sometimes cannot be dialed because it requires a 10-digit or 11-digit format. Press
softkey to scroll through 7, 10 and 11-digit numbers.
Number of digits
7-digits:
10-digits:
11-digits:
4. To dial the displayed number, press s, HEADSET, a LINE button, or pick up the
corded handset.

11.5.2 If you have not programmed your local area code

1. In idle mode, press
You will only see 10-digit numbers (i.e. 234-555-1234).
2. To dial the displayed phone number, press s, HEADSET, a LINE button, or pick up the
corded handset.
You may adjust the number format by pressing
11.6

Call Waiting Caller ID

This feature allows you to see who is calling when you hear the call waiting beep. The caller
identification information appears in the display after you hear the tone.
1. To connect to the waiting call, press FLASH and your first call will be put on hold.
2. To switch between the two calls, press FLASH.
IMPORTANT
To use all the features of this unit, you must subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To know who is calling while you are on the phone,
you must subscribe to Caller ID with Call Waiting Service.
12

Directory and One-Touch Memory Log

You may store data in the Directory (up to 99 records) or the One-Touch Memory (10 buttons
located to the right of the number pad on the base). The Directory and each One-Touch Memory
Log stores up to 16 characters and 32 digits.
The records in the Directory are stored by alphabetic ascending order.
26
DELETE ALL?.
CALLER ID to open the CID record list.
Explanation
7-digit telephone number
3-digit area code
+ 7-digit telephone number
Long distance code 1
+ 3-digit area code
+ 7-digit telephone number
CALLER ID
to open the CID record list.
ALL DELETED.
FORMAT
softkey. For instance, a 7-digit local number
Example
(i.e. 555-5555)
(i.e. 425-555-5555)
(i.e. 1-425-555-5555)
FORMAT
softkey before dialing.
FORMAT