Placing A Call On Hold - Motorola Satellite Series 9500 User Manual

Placing a Call on Hold

You must subscribe to this network feature through
your service provider(s).
+ Iridium Satellite Mode
You can place a call on hold to receive a new call or
while making a new call. You can only place one
call on hold at a time, so some options may not be
accessible if you have already placed a call on
hold.To place a call on hold:
M
1. Press
O
2. Press
you will see
Reconnect?
Once you a call is on hold, you have these options:
If you want to... Then...
Make a new call
Switch Between
Calls
End Current Call Press
End Call that is
on Hold
End Both Calls
until you will see
. Your current call is put on hold and
Call Holding
.
M
Press until you will see
1.
New Call
, and then press
select.
Dial the number as usual, and
2.
then press
When you are connected to either
number, you will see
Switch?
followed by
O
Press to switch to the other call
and automatically place the current
call on hold.
C
at any time.
M
Press until you will see
Call
, and then press
The held call is disconnected, the
current call continues to be
connected, and you see
Close the flip cover.
or
M
Press until you will see
Current & Held Call
O
press to select.
Both calls are disconnected, and the
display returns to standby mode.
.
Call Hold
followed by
Make
O
O
to place the call.
2 Calls
.
End Held
O
to select.
End Call?
End
, and then
to
.
Using Your Phone 51