WorkPlace Appearance for Employees
Configure the Employees community to use the WorkPlace look you defined earlier (Modifying the Default Style
and Layout on page 33).
To specify the Default style and layout for Employees:
1 In the Style list, select Partners style.
2 In the Layout list, select Partners layout.
3 On smaller devices, the layout for this community is automatically changed to accommodate them; for
example, the Intranet Address field (if it is part of the layout) will be displayed on an advanced mobile
device, but not a basic one.
4 Click Finish.
Creating a Partner Community
To give remote access to partners—a less trusted group of users—create a separate community.
To create a community for partners:
1 From the main navigation menu in AMC, click Realms.
2 Click Company XYZ.
3 On the Configure Realm page, click the Communities link at the top; you'll see the Employees and
Default communities. Click New.
4 Enter a name for the new community in the Name field. For example, Partners.
5 To add users to the Partners community, click Edit. The Users and Groups dialog is displayed.
6 You'll see the users you added in Identifying Users on page 30. Click the checkbox next to one or two of
them.
7 Click Next to configure the access methods allowed for partners.
Specifying an Access Method for Partners
The Partners community should be configured for Web access only.
To specify Web access for partners:
1 Clear the Network tunnel client (OnDemand) checkbox; only Web proxy agent should be selected.
2 Click Next to define the zone of trust for partners.
End Point Control for Partners
Configure the Partners community to use the zone of trust you configured earlier (To create a Standard zone
named Partner zone for partners: on page 32).
To specify the Partner zone for partners:
1 In the Standard zones list, select the checkbox next to Partner zone, and then click the right arrow (>>)
button to put it in the In use list.
SonicWall SMA Connect Tunnel 12.0 Deployment Planning Guide
Common VPN Configurations
38