SonicWALL SMA Planning Manual page 36

2 Click New: the Configure Community page appears.
3 Enter a name for the community in the Name field. For example, Employees.
4 To add users as members of the community, click Edit. The Users and Groups dialog is displayed.
5 Select the checkbox next to two of the users you added.
6 Click Save. The Users and Groups dialog closes and the users are now displayed in the Members list.
7 Click Next to configure the access methods allowed for the Employees community.
Specifying Access Methods for Employees
For each community of users, you can configure which access methods are available: Smart Tunnel Access (IP
Protocol), Web‐based proxy access (TCP Protocol), or Web access (HTTP).
For the Employees community, it's likely that you will want to grant open access so that a user can establish
remote access using whatever method is appropriate for his or her device. By contrast, the Partners community,
in this example, will have only Web access.
The tunnel clients give users an "in‐office" experience, with full VPN access to their applications. In the following
steps you'll grant Employees the ability to use OnDemand Tunnel, and set up an IP address pool for the client.
To specify open, tunnel access for employees:
1 In the Tunnel (IP Protocol) section, select the Network tunnel client checkbox. If you don't have an IP
address pool configured yet, a warning is displayed:
SonicWall SMA Connect Tunnel 12.0 Deployment Planning Guide
Common VPN Configurations
36