Table of Contents
Advertisement
Adding an Unrestricted Rule
To add a rule that gives employees access to all resources:
1 Type a name for the second rule (FT employees only).
2 Leave the Action as Permit.
3 Next to the From field, click the Edit button.
4 Select the checkbox next to the Employees community.
5 Click Finish.
Testing the Deployment Scenario
To test out the scenario you have configured, log in to WorkPlace as an employee, and then (in a separate
session) as a partner.
To get to WorkPlace:
1 Click Home in the upper‐right corner of any AMC page.
2 Click the link for WorkPlace, just under the appliance image.
Logging In as an Employee
In Creating an Employee Community on page 35, you set up two users who belong to the Employees community.
Log in using the credentials of one of those users. If you are in the Trusted zone (that is, your device has the
attributes specified in the Windows antivirus device profile), among the resources you should see will be the
two you set up in Adding Resources on page 31.
Logging In as a Partner
In Creating a Partner Community on page 38, you set up at least one user who belongs to the Partners
community. Log in using the credentials of that user. If you are in the Partners zone—meaning that your device
has the attributes specified in the Symantec AV device profile—among the resources you should see will be VAR
marketing collateral. This is because the appliance found a match for you in the first access control rule; once a
match is found, no further rules are evaluated.
Other Remote Access VPN Scenarios
To better understand how to deploy a remote access VPN, here is an overview of some common scenarios.
Topics:
•
Providing Access to Web Resources on page 41
•
Web‐Based File Access to Entire Networks on page 41
•
Broad Access to Network Resources on page 42
•
Remote Access for Mobile Users on page 42
SonicWall SMA Connect Tunnel 12.0 Deployment Planning Guide
Common VPN Configurations
40
Advertisement
Table of Contents
