Ko Propo EX-10 HELIOS Instruction Manual page 18

Indicator warning
18
About the display of each indicator.
Throttle A.B.S Indicator
Throttle Speed
Indicator
Because three indicators other than the power indicator
flashes regardless of a set value when it is turned on
with ET and the button, it is not limited that the function
works.
Warning Display
Battery Alarm
After it returns to an initial screen, Flashing VOLTAGE and Flashing power indicator are released if the
voltage is more than the warning voltage for one minute.
Data Pack Error
Please see model selection (P32) about the display of model memory 0.
Memory Error
If this message does appear frequently, send the transmitter to our service department for repairs.
Power Alarm
It will set it in three minutes at factory setting.
The time can be set at Main Menu: Power Alarm (P28)
The sound of alarm can be set at Main Menu: Option: Buzzer (P29)
Throttle Acceleration
Indicator
This is displayed when the power supply voltage drops about 9V or less.
The character of the BATTERY ALARM flashes. The
power indicator flashes. The alarm buzzer sounds. And
the backlight is compulsorily turned off. VOLTAGE of LCD
keeps flashes though it returns to an initial screen for any
key operation.
It is displayed when there is something wrong with the Data Pack while using it.
DATA PACK ERROR!! flashes.
After any key is operated, Model 0 is displayed.
When malfunction happens to the access of the memory, it is displayed.
MEMORY ERROR!! flashes.
After any key is operated, model memory (model memory 1)
will operate at initial condition.
If the power is turned on again and it is normal, it operates by
an original setting.
The alarm sounds when time that nothing is operated exceeds set time.
Throttle Speed Indicator
When Throttle Speed (P37) is effective, it
flashes. Moreover, the function of On/Off of
Throttle Speed is allocated in ET and the button,
it flashes too.
Throttle A.B.S. Indicator
When Throttle A.B.S (P35 36) is effective, it
flashes. Moreover, the function of On/Off of the
Throttle A.B.S. is allocated in ET and the button,
it flashes too.
Throttle Acceleration
When Throttle Acceleration (P44) is effective, it
flashes. Moreover, the function of On/Off of the
Power Indicator
Throttle Acceleration is allocated in ET and the
button, it flashes too.
Power Indicator
When the power is turned on, it lights.And
It flashes when the voltage drops below 9V.
(battery alarm)
DRAFT