Ko Propo EX-10 HELIOS Instruction Manual page 11

S
CREEN
These screens are displayed when the function menu is opened.
Please see each reference page about a detailed operation method, after each screen is opened
The function menu opens when Jog Dial or (+), (-) keys are operated
from an initial screen.
28 kinds of the right are all function menus.
All of 28 function menu will be displayed when Master is been set
for the menu.
In Custom 1 and Custom 2, only the set content is displayed.
To display all, please refer Change Menu (P17 P26) and return
display menu to the Master.
Can not return to initial screen.
advice
It returns to an initial screen if it keeps pushing the
backing key from any screen is displayed.
Having assumed that the function name is chosen from the display of
the list of the function menu with Jog Dial, and 'Enter' is done opens
and respect opens.
The following screen will be opened when function name is chosen by
Jog Dial or (+), (-) keys then Enter is been pressed.
Model Select
P32
ET Position
P33
Sub Trim
P34
A.B.S
P35/36
Throttle Speed
P37/38
Throttle Punch
P39
Throttle Curve
P40
T
ABLE
F
UNCTION
Throttle Brake
P41
Throttle High Point
P42
Throttle Preset
P43
Throttle Acceleration
P44/45
Steering Speed
P46/47
Steering Punch
P48
Steering Curve
P49
DRAFT DRAFT
M
ENU
Steering Balance
P50
Steering Travel
P51
Automatic Start
P52
Model Copy
P53
Model Name
P54
Memory Reset
P55
Adjust Volume
P56
R RAFT
Model Select
ET Position
Sub Trim
A.B.S
Throttle Speed
Throttle Punch
Throttle Curve
Throttle Brake
Throttle High Point
Throttle Pre Set
Throttle Acceleration
Steering Speed
Steering Punch
Steering Curve
Steering Balance
Steering Travel
Automatic Start
Model Copy
Model Name
Memory Reset
Adjust Volume
Channel Select
Reverse Switch
Trim Rate
Select Up
Up Timer
Down Timer
Lap Timer
Channel Select
P57
Reverse Switch
P58
Trim Rate
P59
Set Up
P60
Up Timer
P61
Down Timer
P62
Lap Timer
P63
11