Ko Propo EX-10 HELIOS Instruction Manual page 14

How to Use Transmitter-1
14
Preparation
Insert dry cells or battery pack into the transmitter (P12)
Be sure to charge battery pack before use.
advice
The battery will last long if crystal is pulled out or the RF module is detached when only the transmitter is operated.
Moreover, when only the transmitter is operated when the management of the band is done in the course etc. , it is
similar. (Please refer P20 D.S.C page)
Switching the Power On
A blue power indicator at the right of the main body lights when the power of the transmitter is on and the LCD
display is displayed with the start sound.
Changing the display or settings.
In case of LCD contrast is too blight or too dark.
Open the main menu and then open the CONTRAST from OPTION to adjust.
Changing the setting of the backlight of the LCD.
(The backlight is [Auto] at factory default.)
Open the main menu and then open the BACK LIGHT from OPTION to set up.
Want to change pitch of the buzzer beep or change the melody.
Open the main menu and then open the BUZZER from OPTION to set up.
Change settings of operations.
Change operation mode of response.
Use Mode Switch (detach RF module from main body) and CH.SELECT of
function menu (P57).
Change function assignment of ET lever or BT button.
Open the function menu and perform SET UP.
The buzzer sounds if it doesn't operate it for a long time. I want to change this setting.
Change the setting of POWER ALARM of the main menu. At shipment from
factory the alarm will sounds when the unit does not operate for more than 3
minutes.
Change the menu list of initial screen that it is displayed when Jog Dial or (+), (-) keys are
operated.
Other than MASTWER, it can be changed to CUSTOM 1 or CUSTOM 2
which you can change display items by yourself.
P29
Reference page
P28
Reference page
P31
P29
Reference page
P30
Reference page
P19
Reference page
P60
P28
Reference page
Reference page
P17