Ko Propo EX-10 HELIOS Instruction Manual page 17

In this unit, to use a lot of functions, Change Menu System is developed, and installed
newly. This is the one that it is made to be able to do by quickly calling practicing more
operation by switching Menu List that registers only the function to often use.
About Change Menu
By registering the content squeezed to CUSTOM1 or CUSTOM2 from a lot of function menu items, the switch is
..function item.. quick and it is made to be able to do.
For instance, CUSTOM1 is a lot of items used for the practice CUSTOM2 registers the item for the race.
The switch of the item used can be easily made by three actions. (Enter, Jog, Enter)
If Master is used, all items are displayed.
Unregistered items functions are also effective. (Just not displayed)
Change Menu Procedure
It is an explanation of the procedure for switching actually.
Select the menu that you want to display in the main menu.
Press the enter key from the initial screen
to display main menu.
Following three menu items MASTER, CUSTOM1 and
CUSTOME2 will be displayed at the first screen of
main menu. Select the items you want to use by Jog
Dial or +.- keys then press enter.
The screen returns to an initial screen, the
name of function menu is been changed to the name
that selected.
Please see main menu P26 about detailed operation methods such as the item
additions and editing each menu.
Can not return to initial screen.
advice
Whatever the display screen is, it returns to an initial screen if you keep pressing back key.
Can not select CUTOM2!
advice
CUSTM2 can not be selected at factory default settings because there is no items are registered. I can be used if you
register or add items in the menu contents. (Add menu P26)
Change Manu
MASTER is using
Changed to
CUSTOME1
In the example of the display,
it switches from MASTER to
CUSTOM1
DRAFT
.
17