Hardware Installation; Connect The Ethernet Cable; Connect The Coaxial Cable - D-Link DXN-W224 User Manual

Wireless ethernet coaxial bridge

Hide thumbs Also See for DXN-W224:

Table of Contents

HARDWARE INSTALLATION

Power

Plug the DXN-W224 into an AC wall outlet or power strip.

Note: Power source is confirmed when the green LED Power indicator on the

DXN-W224 is illuminated.

Connect the included Ethernet cable to the LAN port located on the DXN-W224 and

attached the other end of the Ethernet cable to the network or PC.

Connect coaxial cable to the Coax I/O port located on DXN-W224 and attached the

other end of the coax cable to your cable jack inside the house.

Note: Please make sure the DXN-W224's configuration switch is in

MoCA mode. Coaxial Network Connectivity is confirmed when the green LED COAX

indicator on the DXN-W224 is illuminated.

If there is TV service being received in the room and you wish to continue viewing

the service, connect the other coax cable to the TV Out port on the DXN-W224 and

attach the other end of the coax cable to your television, Set-top Box (STB), or VCR

as desired.

Table of Contents