Table of Contents
Advertisement
MAINTENACE- SYSTEM
Save settings to local hard
drive: Use this option to save the current router
configuration settings to a file on the hard disk of the computer you are using. First,
click the Save button. A file dialog will appear, allowing you to select a location and
file name for the settings.
Local settings from local hard drive:
Use this option to load previously saved router
configuration settings. First, use the Browse option to find a previously saved file of
configuration settings. Then, click the Load button to transfer those settings to the
router.
Restore the (wireless) to factory default settings:
This option will restore wireless or
all configuration settings back to the settings that were in effect at the time the
router was shipped from the factory. Any settings that have not been saved will be
lost, including any rules that you have created. If you want to save the current router
configuration settings, use the Save button above.
Reboot the
device: Click to reboot the router.
MAINTENACE-FIRMWARE
You can upgrade the firmware of the access point here. Make sure the firmware you
Advertisement
Table of Contents
