Table of Contents
Advertisement
IPv6 Connection type:
If you select "LOCAL Connectivity Only":
The user may see the LAN IPv6 Link-local address in the following section. It's the
IPv6 address that you can use to access the web-based management interface. The
user can configure the IPv6 local settings.
The Link-local address is used by nodes and routers when communicating with
neighboring nodes on the same link. This mode enables IPv6-capable devices to
communicate with each other on the LAN side.
If you select" Static IPv6":
IPv6 Address:
Enter the IP address supplied by your ISP (Internet service provider).
Subnet Prefix
length: Enter the value used here. This subnet supported with prefix
/64 is supported in LAN.
Default
gateway: Enter the info provided by your ISP.
Primary IPv6 DNS
server: Enter the info provided by your ISP.
Secondary IPv6 DNS
server: Enter the info provided by your ISP
If you select "AutoConfiguration (SLAAC/DHCPv6)":
DXN-W224 can automatically assign IPv6 address through SLAAC/DHCPv6 (Stateless
Address AutoConfiguration) this option.
Advertisement
Table of Contents
