Table of Contents
Advertisement
Current Time:
Displays the current date and time of the router.
Time Zone:
Select your Time Zone from the drop-down menu.
Enable Daylight saving:
To select Daylight Saving time manually, select enabled or
disabled, and enter a start date and an end date for daylight saving time.
Enable NTP server:
NTP is short for Network Time Protocol. A NTP server will sync
the time and date with your router. This will only connect to a server on the Internet,
not a local server. Check the box to enable this feature.
NTP server used:
Enter the IP address of a NTP server or select one from the
drop-down menu.
Set the day and time manually:
To manually input the time, enter the values in
these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set
Time.
Advertisement
Table of Contents
