Table of Contents
Advertisement
ADVANCED-Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless
network during the "Initial setup" as well as the "Add New Device" processes. The
Wi-Fi Alliance (WFA) has certified it across different products as well as manufactures.
The process is just as easy, as depressing a button for the Push-Button Method or
correctly entering the 8-digit code for the Pin-Code Method. The time reduction in
setup and ease of use are quite beneficial, while the highest wireless Security setting
of WPA2 is automatically used.
ENABLE: Check this box to enable WPS service.
Current
PIN: Shows the current value of the router's PIN.
A PIN is a unique number that can be used to add the router to an existing network or to
create a new network. The default PIN may be printed on the bottom of the router. For
extra security, a new PIN can be generated. You can restore the default PIN at any time.
Only the Administrator ("admin" account) can change or reset the PIN.
Generate New
PIN: Create a random number that is a valid PIN. This becomes the
router's PIN. You can then copy this PIN to the user interface of the registrar.
Reset PIN To
Default: Restore the default PIN of the router.
Add Wireless Station:
network.
The wizard will either display the wireless network settings to guide you through
manual configuration, prompt you to enter the PIN for the device, or ask you to
press the configuration button on the device. If the device supports Wi-Fi Protected
This Wizard helps you add wireless devices to the wireless
Advertisement
Table of Contents
