Table of Contents
Advertisement
Setup and has a configuration button, you can add it to the network by pressing the
configuration button on the device and then the on the router within 60 seconds.
The status LED on the router will flash three times if the device has been successfully
added to the network.
There are several ways to add a wireless device to your network. A "registrar" controls
access to the wireless network. A registrar only allows devices onto the wireless network
if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the
device. The router acts as a registrar for the network, although other devices may act as
a registrar as well.
MAINTENACE-ADMIN
This section is to provide the MSO able to configure different access levels for different
users. ADMIN can set the password for three different levels.
Advertisement
Table of Contents
