Setting Using Wheel Circumference - VDO Cyclecomputing X3DW Instruction Manual

D GB F I
How to set the tyre size by selecting the tyre:
Using
SELECT. Confirm with
You are now in setting mode
(pressing
you back to function mode).
Using up/down go to
WHEELSIZE/SET.
Confirm with
MEASUREMENT/KMH.
Confirm with
change to MPH.

5.2.2 Setting using wheel circumference

To enter the wheel size manually, you must first
measure the wheel roll circumference on your bike.
Measuring wheel roll circumferences:
42 X3DW
go to SETTINGS/
.
M
C for 3 seconds gets
.
M
M or to
WHEELSIZE/BIKE 1 (use
go to setting for bike 2).
Confirm with
WHEELSIZE/ TYRE SELECT.
Confirm with
TYRE SELECT/SELECT.
Now select your tyres using
The confirmation question appears "Tyresize"/
SELECT OK? When the displayed tyre size matches
the one you want, confirm with
The display confirms WHEELSIZE/SET DONE
Automatic return to SETTINGS/SELECT.
step 1 Precisely align valve on the front wheel
vertically to the ground.
Step 2 Mark this spot on the ground with a line
(e.g. chalk).
.
M
M .
. Confirm with M .
M .
>>> P07
VDO CYCLECOMPUTING
to