Connection; Usb Cable Connection; Cable Disconnection - Ingenico ISMP3- User Manual

In case you wish to manually power off the terminal, press "-" key + yellow key
simultaneously for a few seconds. This action is only possible when the terminal is not in
charging mode.
4.7.

Connection

4.7.1.

USB cable connection

A micro USB connector is located on left side of the terminal.
•
Present the device in front of the connector and plug it
CAUTION
Use only Ingenico cable or accessory not to void warranty.
4.7.2.

Cable disconnection

•
Present the device in front of the connector and unplug it
•
User Guide
900021302 R11 000 01
USB Connector
20/31
Copyright © 2011 Ingenico
All rights reserved