Upsampler Settings Menu; Sync Mode; Dual Aes - DCS vivaldi upsampler User Manual

dCS Vivaldi Upsampler Plus User Manual

UPSAMPLER SETTINGS Menu

Sync Mode

This page sets the clocking for the digital input that is currently selected. The options
are:
Audio – The Upsampler extracts the clock from the data stream connected to the
selected digital input and locks to it. Use this setting for sources that do not have a
suitable Word Clock input. This arrangement does NOT give the best jitter performance
or the best sound quality. Sync to
Network
or
– If the USB1,
Master
available, the Upsampler must be set to
internal clock controls the system timing.
Word Clock 1-2 Auto
DAC and computer, where the data rate may keep changing. Connect the
In1
input to a Clock output set to 44.1 or 88.2 or 176.4kHz and connect
input to a Clock output set to 48, 96 or 192kHz. The DAC's Word Clock inputs should be
connected similarly. When the sample rate changes, the DAC and Upsampler will
automatically select a Word Clock frequency that is synchronous with the data. The
selected word clock is displayed.
Word Clock1
In1
Input.
Word Clock2
In2
Input.
If the Upsampler cannot find a word clock that is synchronous with the data, it will default
to Audio sync (or
The Upsampler remembers the
Select the required input before changing the

Dual AES

Dual AES
The
96, 176.4 or 192kS/s or DSD in DoP format ONLY. When set to
pair of data is split between the
as a pair. Each wire runs at half the sample rate (44.1, 48, 88.2, 96 or 88.2kS/s
respectively). The left channel data appears on the
appears on the
When set to
data at the output sample rate. Using these together in
same as a Dual AES pair.
When the output sample rate is set to 352.8 or 384kS/s or DSDx2, Single AES mode is
not available, so Dual AES mode is automatically selected.
Vivaldi Upsampler Manual v2_0x
Audio
inputs are selected.
USB2 Network
or
– This mode is designed for easy operation with a Vivaldi Clock,
– The Upsampler locks to an external clock connected to the
– The Upsampler locks to an external clock connected to the
Master mode for some inputs) and display the "Bad Clock" icon.
Sync Mode
menu page sets the output mode when the output sample rate is 88.2,
AES1
AES2
output.
AES1
Dual AES Off, both
is not available when the
inputs are selected but a Master Clock is not
Master mode. In this mode, the Upsampler's
setting separately for each digital input.
Sync Mode
AES2
and outputs, they MUST be used together
AES1
AES2
and outputs carry the same single AES
Dual AES Off
Page 42
Software Issue 2.0x
November 2016
SDIF-2, USB1,
Word Clock
Word Clock In2
Word Clock
Word Clock
setting.
Dual AES On, a stereo
output, the right channel data
mode is NOT the
English version
USB2,