Table of Contents
Advertisement
dCS Vivaldi Upsampler Plus User Manual
• Download the dCS Vivaldi 2.0 App from the App Store to your iPad / iPhone / iPod and install it.
• Connect the Upsampler's
• Select the Upsampler's
Open the Upsampler's Menu and select
the basic setup without a Master Clock.)
Connect the Upsampler's
(or AES3), as this input will accept tunnel commands from the Upsampler. (Also see
page 26.)
Open the DAC's Menu and select
setup without a Master Clock.)
• Connect the control device (e.g. iPad) to the network.
• Launch the dCS Vivaldi 2.0 App.
• The system will search for compatible Vivaldi Upsamplers. When the Device list appears, tap the
Upsampler icon in the zone you want to use.
• Tap
Configure
to change the Upsampler's settings, find information about the unit or use the test
Preferences
features. Tap
Preferences
Favourites on the
Vivaldi Upsampler Manual v2_0x
Network
interface to the Ethernet network.
Network
input.
AES1+2
output (or AES1) to the Vivaldi DAC's
Settings > Sync Mode >
to optimise the unit for your use. You can add Spotify or Tidal to your
page.
Page 19
Settings > Sync Mode > Master
Audio. (This is the basic
Software Issue 2.0x
November 2016
Mode. (This is
AES3+4
input
English version
Advertisement
Table of Contents
