Table of Contents
Advertisement
dCS Vivaldi Upsampler Plus User Manual
STEP 2 – Connecting an Output
Choose which output interface you want to use and connect it up as described below. The
Upsampler's main output is
Dual AES
AES1 Out
Connect the
on the front panel to set the output sample rate to 88.2, 96, 176.4, 192, 352.8 or 384kS/s or DSD.
Open the menu, scroll to the
(The button sequence is
Use the DAC's
and set it to accept Dual AES.
All dCS DACs are capable of Dual AES operation, older models may be limited to a
!
maximum of 192kS/s. Some other manufacturer's DACs may have 2 single AES inputs
that are not Dual AES capable. Please check the DAC manual to be sure.
Analogue
outputs
to
Amplifier
Vivaldi Upsampler Manual v2_0x
Dual
AES. You can connect as many outputs as you wish.
AES2
Outputs to matching inputs on your DAC. Use the
and
Menu, ►, Menu,
Input
button to select the
Figure 1 – Connecting the Dual AES output
Settings > Dual AES
page and make sure it is set to On.
►.) If it is not, press the
Dual AES
input. You may need to open the DAC's menu
Page 11
Software Issue 2.0x
November 2016
Output
button
Menu
button once.
English version
Advertisement
Table of Contents
