Table of Contents
Advertisement
dCS Vivaldi Upsampler Plus User Manual
Tap
on the Home page to access:
Unit Settings
Vivaldi Upsampler Manual v2_0x
Transport controls
The CD control panel works in the usual way.
To program a track sequence, stop playback, tap
the Program pad, enter a track number (e.g. 5 or
05), enter the rest of the sequence and tap Play.
The Transport will display (for example) 8PGM3,
which means there are 3 tracks in the sequence
and the last is track 8.
To remove the last track from the sequence, stop
playback and tap Clear. Tap Program again to
cancel the sequence and play tracks in the usual
way. Opening the CD tray cancels Program mode
also.
The 3 pads above the Volume taper are:
• Repeat Track / Repeat Disk / Repeat Off.
• Play the other layer of a CD/SACD hybrid disc.
• Change Phase.
Playback Controls
Page 27
Software Issue 2.0x
November 2016
English version
Advertisement
Table of Contents
Need help?
Do you have a question about the vivaldi upsampler and is the answer not in the manual?
Questions and answers