Belling IH60 Users Manual & Installation Handbook page 11

using the hob - induction
troubleshooting
the hob produces a smell the first few times
it is used
Heat a pan full of water on each zone for
half an hour.
Pans make a noise during cooking!!
This is caused by vibration due to the
passage of energy from the hob to the
pan. On a high setting this is quite normal
for certain types of saucepan. It will not
damage the hob.
the hob makes a slight clicking sound
This is caused by the distribution of power
between two heating zones on the same
side of the hob.
the fan keeps working for a few minutes after
the hob has been turned off
To cool down the electronics.
the hob won't work. the indicators don't come
on
The electricity supply is not reaching the
appliance (faulty supply or connection);
Check the fuses and the cut-out switch.
Refer to Troubleshooting chart and if
problems persist call, the customer service
hotline for further assistance.