Learning Remote - Samsung RMC30D1 User Manual

Learning Remote

1
2
3
4
20
RMC30D1_ZA]BN68-03328B-00L03.indb 20
Press button more than 1 second while keeping the remote controls 1 inch (2cm)
from each other as described in the picture.
The learning LED is directly facing the remote to be learnt (within 45-60 degree
depending on the LED chosen).
The two remotes are placed on a fl at non glossy surface.
The remote to be learnt does not feature a long signal.
NOTE
• Put Touch Control and the device remote about 2cm apart and confi gured
as shown above. If you do not, the remote learning process may not operate
normally.
• Some external device remote controls are not compatible with the Touch
Control. Search the codeset to fi nd the compatible remotes.
• During remote control learning, ensure there is no object between the IR
sensors on the Touch Control and the remote control for the external device.
– Ensure the sensor on the
remote you want to pair
with is pointing to the IR
IR receiver
receiver.
2011-01-11 오후 3:4