Samsung RMC30D1 User Manual page 8

Led tv - d7000 and above pdp tv - d8000 touch control
Table of Contents

Advertisement

You can set up the network using One Foot Connection, WPS(PBC) and wireless
router.
Go to Applications > Settings and tap Network.
• A connection can be established using Network Setup unless the TV and Touch Control
• Confi gure the network settings for the TV before you connect the TV and Touch Control.
Using One Foot Connection
• Keep within 10inches (25cm) between Touch Control and center of Samsung TV.
Select a connection type
c One Foot Connection
1
2
3
4
8
RMC30D1_ZA]BN68-03328B-00L03.indb 8
are connected in First Time User Setup.
For details, refer to the TV manual.
Touch Control
Network Settings
General
WPS(PBC)
Previous
Next
Before you start pairing, go to <Network> and check <Wi-Fi Settings> is set to
<On>.
Keep within 10 inches (25cm) between Touch Control and center of Samsung
TV.
• To connect using One Foot Connection, turn off any other devices nearby that
support auto confi guration fi rst.
Tap <Start> to go to next step.
Select <One Foot Connection> and tap <Next>.
• It may take about one minute to establish a wireless connection between the TV
and Touch Control.
• If the connection fails, choose one of the other connection methods: PBC(WPS)
or One Foot Connection.
TV
Network Settings
TV and Touch Control are
connected without Access
Point. You cannot use network
function if you don't connect
Access Point. To use network
function from Touch Control,
run Network settings on TV.
IP Set
OK
Connect TV
Select a TV
c TV A (192.168.1.16)
TV B (192.168.0.6)
TV C (192.168.1.11)
Search
2011-01-11 오후 3:4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents