Lenovo ThinkSystem SR850 Maintenance Manual page 92

2. Watch the procedure. A video of this procedure is available from the following links:
• https://www.youtube.com/playlist?list=PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
• http://list.youku.com/albumlist/show/id_50483449
To install the operator panel tray assembly, complete the following steps:
Step 1. Align the operator panel tray assembly with the slot in the front of the server, and insert the tray
assembly until it clicks into place.
Figure 78. Operator panel tray assembly installation
Step 2. Install the tray assembly to the server with a screw.
Step 3. Connect the front operator panel cable and USB cables to the system board (see "System-board
connectors" on page 21 for location of the connector).
Note: Make sure the USB 3.0 connector stays vertical when being pushed into the connector on
the system board.
Figure 79. Connecting USB 3.0 cable
After installing the operator panel tray assembly, complete the following steps:
1. Reinstall the top cover (see "Install the top cover" on page 131).
84
ThinkSystem SR850 Maintenance Manual