Polycom DOC2585A Getting Started Manual page 104

Chapter 3- Audio Only Basic Configuration and Operation
3-28
Table 3-4 New Conference – General Options (Continued)
Field
Conference
Password
Chairperson
Password
Reserve
Resources for
Video Participants
Reserve
Resources for
Audio Participants
Description
Enter a password to be used
by participants to access the
conference. If left blank, no
password is assigned to the
conference.
This password is valid only in
conferences that are
configured to prompt for a
conference password.
Enter a password to be used
by the RMX to identify the
Chairperson and grant him/her
additional privileges. If left
blank, no chairperson pass-
word is assigned to the confer-
ence.
This password is valid only in
conferences that are config-
ured to prompt for a chairper-
son password.
•
In RMXs configured for Voice conferencing,
leave this field set to 0.
Enter the number of voice participants for which the
system must reserve resources.
Default: 0 participants.
Maximum number of participants in a conference:
•
RMX 1500: 360 VOIP and 120 PSTN
participants.
•
RMX 2000 MPM Mode: 400 VOIP participants.
•
RMX 2000 MPM+ Mode: 800 VOIP participants
(if all ports are set to Audio Only).
•
RMX 2000 MPMx Mode: 720 VOIP participants
(if all ports are set to Audio Only).
•
RMX 4000 (MPM+/MPMx): 800 participants (if
all ports are set to Audio Only)
These fields are
numeric and have
a default length of
4 characters. The
administrator can
modify them in the
Setup - System
Configuration
settings. For more
information, see
RMX
Administrator's
Guide, "System
Configuration" on
page 18-5.