Rointe kyros Instruction Manuals page 18

KYROS
• USER Function
To enter the USER function, ensure
sub-menu and press the
in order to access the menu. The default PIN is 0000. To enter the PIN use
the and and
to select the correct numbers, pressing
to confirm. Once the full 4 digits have been entered, move to OK on the
display panel and press the
has been entered correctly, the main USER function sub-menu will be shown.
The below icons displayed on the screen take you to the following functions:
Enable/
Disable
function
• Enable /Disable function
To access the Enable/Disable function, ensure the
in the `Program´ sub-menu and press the
Use the and
ON to enable or OFF to disable. Once the desired option is highlighted press
the button to confirm. Use the
panel or leave for 30 seconds without pressing any buttons.
On the main screen you will see the
icon in Manual function and
18
icon is highlighted in the `Program´
button to access. A 4 digit PIN code is required
and buttons to move left, right, up or down
after each number is highlighted
button to confirm. Once the PIN number
Upper
Change
temperature
PIN
buttons to move up and down respectively to select
button to go back to the main display
icon in automatic function, the
when in Pilot Wire control function.
Lower
temperature
limit limit
icon is highlighted
button to access.
INSERT PIN
1 2 3
4 5 6
7 8 9
0
OK
CANCEL
USER
FUNCTION
ON
OFF