Page 1
KYROS RADIATOR - RADIADOR - RADIATEUR - RADIADOR - HEIZKÖRPER INSTRUCTIONS MANUAL MOUNTING, INSTALLATION, STARTING AND OPERATION MANUAL DE INSTRUCCIONES MONTAJE, INSTALACIÓN, PUESTA EN MARCHA Y FUNCIONAMIENTO MANUEL D’INSTRUCTIONS MONTAGE, INSTALLATION, MISE EN MARCHE ET FONCTIONNEMENT MANUAL DE INSTRUÇÕES MONTAGEM, INSTALAÇÃO, LIGAÇÃO...
Page 2
KYROS 1. DESCRIPTION OF THE “KYROS ” RADIATOR 1.1. Front panel parts TFT DISPLAY CONTROL PANEL...
Page 3
The screen will automatically go into sleep mode if no button is pushed for 10 seconds. By pushing the button again the radiator will go into standby mode with the word “Standby” appearing followed by the Rointe logo.
Page 4
KYROS 1.3. Setting the day and time By pressing the button for 3 seconds, we can access the time and date adjust feature to adjust the time and date of our radiator. Pressing the button , flashes up the hours, minutes and days of the week according to the number of times it is pressed.
Page 5
2. Press and we can select using the ECO temperature (15ºC to 19.5ºC). The symbol and the temperature will flash. 3. After pressing the button once again, the numbers of the week will start flashing and show as SEL1, SEL2, SEL3…. We can go forwards and backwards using the button .
Page 6
2.1. Mounting The KYROS radiator works by means of natural air convection (Figure 1). In order to achieve optimal functioning and an even distribution of heat, the lower part of the radiator, once mounted on the wall, must be at least 10 to 12 cm from the floor, and 30 cm at the most.
Need help?
Do you have a question about the KYROS and is the answer not in the manual?
Questions and answers