Rointe kyros Instruction Manuals page 16

KYROS
STEP 2 - Select ECO mode temperature
ECO mode will be programmed next. Select the ECO mode temperature
between 7.5ºC and 18.5ºC. The icon and the temperature will flash. Press
the button to confirm.
STEP 3 - Select the Days
The days of the week will start flashing on the display panel and show as
DAY 1, DAY 2, DAY 3 etc.
Use the and buttons to move forwards or backwards through the
days. Press to select the day or days that you wish to include in your
AUTOMATIC program. The day will stop flashing once selected. Repeat for
all the days you wish to program and once all days are selected press the
button to move onto setting the hour.
STEP 4 - Select the Hours
Once step 3 has been completed, 0h appears on the display panel. 0h is
equal to midnight. Use the or buttons to select the hour you wish
to change. Use the button to change the mode (COMFORT, ECO or
12h
nothing) for the hour you wish to modify. The corresponding icon for that
mode will appear at the top of the screen.
To finish the programming press or leave for 30 seconds without
pressing any buttons. To change the programming go back to step 1 and
proceed as described before.
*If you wish to have different days with different programming within your
program you will need to modify each day separately, starting from the
Main Menu again for each day/days. Follow Steps 1 to 4 above to program
multiple differing days/hours/temperatures.
16