Table of Contents
Advertisement
A
Hearth Products
Owner's Operation and Instruction Manual
MODELS: AW100E, AW100EB
CAUTION!
Please read this entire manual before you
install or use your new room heater. Failure
to follow instructions may result in property
damage, bodily injury, or even death.
Improper Installation Could Void
Your Warranty!
SAFETY NOTICE:
If this heater is not properly installed, a
house fire may result. For your safety, follow
the installation instructions. Never use make
shift compromises during the installation
of this heater. Contact local building or
fire officials about permits, restrictions and
installation requirements in your area.
U.S. Environmental Protection Agency
Certified to comply with 2015 particulate emissions
standards.
CONFORMS TO UL-1482-11 (R2015) and ULC-S627-00
WASHINGTON STATE APPROVED
Not approved for use in mobile homes, DO NOT INSTALL IN A MOBILE HOME
SAVE THESE INSTRUCTIONS
THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU TO ORDER
REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
French version is available for download from the U. S. Stove website: http://www.usstove.com
Version française est disponible pour téléchargement à partir du site Web de la Poêle US: http://www.usstove.com
United States Stove Company
227 Industrial Park Road
P.O. Box 151
South Pittsburg, TN 37380
Report#: 0215WS054S
852470C-3602F
Advertisement
Table of Contents
Related Manuals for Ashley AW100E
Summary of Contents for Ashley AW100E
- Page 1 Hearth Products Owner’s Operation and Instruction Manual MODELS: AW100E, AW100EB CAUTION! Please read this entire manual before you install or use your new room heater. Failure to follow instructions may result in property damage, bodily injury, or even death. Improper Installation Could Void...
- Page 2 The instructions pertaining to the installation of your wood stove comply with UL-1482-11 (R2015), and ULC-S627-00 standards. This manual describes the installation and operation of the Ashley, AW100E, AW100EB wood heater. This heater meets the 2015 U.S. Environmental Protection Agency’s crib wood emission limits for wood heaters sold after May 15, 2015.
-
Page 3: Tools And Materials Needed For Installation
TOOLS AND MATERIALS NEEDED FOR INSTALLATION TOOLS MATERIALS • Pencil • Chimney Connection- 6” Diameter Black Steel pipe (24 gauge minimum) and elbow(s) either adjustable or corrugated as • Measuring Tape or 6 foot rule necessary • Tin Snips • 1/2” Sheet Metal Screws •... -
Page 4: Assembly Instructions
ASSEMBLY INSTRUCTIONS BLOWER ASSEMBLY-OPTIONAL INSTALLATION 1. Remove the Panel (A) using tin snips or knock out using a hammer and chisel careful not to distort the mounting surface. 2. Attach the Blower Mounting Box (B) to the rear of the unit using four(4) of the supplied #10 screws. 3. -
Page 5: Installation
INSTALLATION SAFETY NOTICE • IF THIS STOVE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THE INSTALLATION INSTRUCTIONS. • CONSULT YOUR MUNICIPAL BUILDING DEPARTMENT OR FIRE OFFICIALS ABOUT PERMITS, RESTRICTIONS AND INSTALLATIONS REQUIREMENTS IN YOUR AREA. •... -
Page 6: Clearances To Combustibles
CLEARANCES TO COMBUSTIBLES It is of utmost importance that the clearances to combustible materials be strictly adhered to during installation of the stove. Refer to the tables below. (458mm) (1296mm) (458mm) (2134mm) 23.25” (407mm) (989mm) (356mm) (305mm) • Floor to ceiling height must be at least 7’ (2.13m) in all cases. NON-COMBUSTIBLE CONSTRUCTION •... -
Page 7: Floor Protector
FLOOR PROTECTOR When the heater is used on a combustible floor, use an Underwriters Listed floor protector that conforms to UL Standards (UL 1618) and CAN/ULC for Canada, that provides at minimum type 1 ember protection. The floor protector should be under the stove, 16” (18” for Canadian Instillations)beyond the front and 8” beyond each side of the fuel loading and ash removal opening. -
Page 8: Chimney Connector (Stove Pipe)
CHIMNEY CONNECTOR (STOVE PIPE) Your chimney connector and chimney must have the same diameter as the stove outlet (6”). If this is not the case, we recommend you contact your dealer in order to insure there will be no problem with the draft. The stove pipe must be made of aluminized or cold roll steel with a minimum thickness of 0.021”... - Page 9 CHIMNEY Take into account the chimney’s location to insure it is not too close to neighbours or in a valley which may cause unhealthy or nuisance conditions. Your wood stove may be hooked up with a 6” factory built or masonry chimney. If you are using a factory built chimney, it must comply with UL 103 or CSA-B365 standard;...
-
Page 10: Factory Built Chimney
FACTORY BUILT CHIMNEY When a metal prefabricated chimney is used, the manufacturer’s installation instructions must be followed. You must also purchase (from the same manufacturer) and install the ceiling support package or wall pass- through and “T” section package, firestops (where needed), insulation shield, roof flashing, chimney cap, etc. -
Page 11: Masonry Chimney
MASONRY CHIMNEY Ensure that a masonry chimney meets the minimum standards of the National Fire Protection Association (NFPA) by having it inspected by a professional. Make sure there are no cracks, loose mortar or other signs of deterioration and blockage. Have the chimney cleaned before the stove is installed and operated. When connecting the stove through a combustible wall to a masonry chimney, special methods are needed. -
Page 12: Combustible Wall Chimney Connector Pass-Throughs
COMBUSTIBLE WALL CHIMNEY CONNECTOR PASS-THROUGHS Method A. 12” (304.8 mm) Clearance to Combustible Wall Member: Using a minimum thickness 3.5” (89 mm) brick and a 5/8” (15.9 mm) minimum wall thickness clay liner, construct a wall pass-through. The clay liner must conform to ASTM C315 (Standard Specification for Clay Fire Linings) or its equivalent. -
Page 13: Do Not Burn
WOODSTOVE UTILIZATION This heater is designed to burn natural wood only. Higher efficiencies and lower emissions generally result when burning air dried seasoned hardwoods, as compared to softwoods or to green or freshly cut hardwoods. DO NOT BURN: 1. Garbage; 10. -
Page 14: Operational Tips
- ignition problems - creosote build-up causing chimney fires - low energy yield - blackened windows - incomplete log combustion Smaller pieces of wood will dry faster. All logs exceeding 6” in diameter should be split. The wood should not be stored directly on the ground. Air should circulate through the cord. A 24” to 48” air space should be left between each row of logs, which should be placed in the sunniest location possible. - Page 15 IGNITION The top down method of fire building is recommended for this appliance. Place the largest pieces of wood on the bottom, laid in parallel and close together. Smaller pieces are placed in a second layer, crossways to the first. A third layer of still smaller pieces is laid crossways to the second, this time with some spaces between.
- Page 16 fire with the PAC set on high and leave it on high until the secondary flames continue to burn after the PAC has been adjusted to a lower setting. Reset the PAC to high when reloading. The thermostat also controls the amount of primary air entering the unit.
-
Page 17: Lighting And Operation
LIGHTING AND OPERATION 1. IMPORTANT! – NEVER OPERATE THIS WOODSTOVE WITHOUT THE SECONDARY AIR TIMER IN THE LOCKED OPEN POSITION WHEN LIGHTING A FIRE OR RELOADING! 2. Set the PAC dial and the thermostat on HIGH to provide maximum draft. 3. -
Page 18: Creosote Formation And Need For Removal
VISIBLE SMOKE The amount of visible smoke being produced can be an effective method of determining how efficiently the combustion process is taking place at the given settings. Visible smoke consist of unburned fuel and moisture leaving your stove. Learn to adjust the air settings of your specific unit to produce the smallest amount of visible smoke. -
Page 19: Maintenance
CAUTIONS: • ASHES COULD CONTAIN HOT EMBERS EVEN AFTER TWO DAYS WITHOUT OPERATING THE STOVE. • THE ASH PAN CAN BECOME VERY HOT. WEAR GLOVES TO PREVENT INJURY. • NEVER BURN THE STOVE WITH THE ASH TRAP OPEN. THIS WOULD RESULT IN OVER FIRING THE STOVE. DAMAGE TO THE STOVE AND EVEN HOUSE FIRE MAY RESULT. -
Page 20: Repair Parts
REPAIR PARTS... - Page 21 REPAIR PARTS Key Part No. Description Qty. 852472 Hi/Lo Label 610145 Cabinet Front Weldment/Assy. 852488 Plate, Control Panel 89687 Thermostat Knob Black 27468 Air Box Cover 610184 Air Distribution Box 69207 Draft Plate Weld Assembly 25550 H.pin Drft Damper 40075 Frame, Draft Door 88090 Gasaket...
- Page 22 REPAIR PARTS Key Part No. Description Qty. 83683 Wooden Knob 27486 Door Handle 27462 Door Catch 40763 Feed Door 27489 Fire Door Hinge 88032 1” Rope Fiber 41” 40764 Cast Door 27460 Ash Door Hinge 88032 1” Rope Fiber 27” In order to maintain warranty, components must be replaced using original manufacturers parts purchased through your dealer or directly from the appliance manufacturer.
- Page 23 REPAIR PARTS Key Part No. Description Qty. Baffle Weldment 610235 610230 Top Brick Rack 89066 Firebrick (4-1/2 X 9) 27472 Brick Spacers 27564 Floor Back 610221 Floor (Welded) 610223 Cleanout Cover Weldment In order to maintain warranty, components must be replaced using original manufacturers parts purchased through your dealer or directly from the appliance manufacturer.
-
Page 24: Time Period
Limited Warranty Circulating Heaters The operation of this heater in a manner inconsistent with the owner’s manual will void you warranty and is also against federal regulations. United States Stove Company warrants to the original purchaser its products against premature failure of any component due to workmanship, quality, or materials as follows: TIME PERIOD: Firebox ............................ -
Page 25: Service Record
Service Record It is recommended that your heating system is serviced regularly and that the appropriate Service Interval Record is completed. Service Provider: Before completing the appropriate Service Record below, please ensure you have carried out the service as described in the manufacturer’s instructions. - Page 26 HOW TO ORDER REPAIR PARTS / COMMENT COMMANDER DES PIÈCES DE RECHANGE This manual will help you obtain efficient, dependable service from your heater, and enable you to order repair parts correctly. Keep this manual in a safe place for future reference. When writing, always give the full model number which is on the nameplate attached to the heater.
Need help?
Do you have a question about the AW100E and is the answer not in the manual?
Questions and answers