Cisco Telepresence Remote Control - Cisco Codec C20 Reference Manual
Telepresence system
Hide thumbs
Also See for Codec C20:
- Reference manual (195 pages) ,
- Administrator's manual (145 pages) ,
- User manual (54 pages)
Table of Contents
Advertisement
Cisco TelePresence System Codec C20
Contents
Introduction
Cisco TelePresence Remote Control
Microphone:
Press the
key to toggle the microphones on/off.
Volume:
Press the
+
or
–
on the
Mute:
Press the
–
on the
OK/Select:
Press the
key to confirm your choice or selection.
Phone book:
Press the
key to display the local Phone
Home:
Press the
key to key to show the menu on screen.
INITIATE A CALL: Select a name from the Phone book or enter
the name, number or URI and press the Call key to initiate the
SHORTCUT TO RECENT CALLS: Use the Call key as a shortcut
to Recent Calls when the Call menu is not visible.
Clear:
Press the
key to remove characters in a text field.
Grab the remote control and make sure your hand
touches the rubber line sensors going along both
sides of the remote control.
or: Touch any key on the remote control.
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API
Function keys:
functions. Each key reflects a soft key on screen.
key to adjust the codec
volume.
key to mute the volume
during an incoming call.
book.
Call:
Using the
key:
call.
Waking up the system
xConfiguration
xCommand
Represents shortcuts and advanced
165
API Reference Guide
xStatus
Presentation:
Press the
key to show/hide a presentation.
Zoom:
Press the
+
or
–
on the
key to zoom the camera
in and out.
Arrows:
•
Up/Down:
Use the
and
arrow keys to navigate in
the menu.
•
Arrow Right:
Press the
arrow key to expand the selected
menu item or to move to the right in a text field.
•
Arrow Left:
Press the
arrow key to go one step back in
the menu or to move to the left in a text field.
Layout:
Press the
key to display the Layout menu, then
select a view in the menu.
End call/Standby:
Press the
key to end a call, or when
idle, press and hold the key to go into standby mode.
Alphanumeric keypad:
Use the keypad in the same way as you
would use a cellular phone.
•
0-9, a-z, period (.), @, space, *:
Press a key repeatedly
to toggle between the options displayed on each key.
•
abc/123 #:
Press the # key to toggle between touch tones
mode (long press), lower case characters and numbers.
IR transmitter range (DIP switch setting)
The IR transmitter has a short and long range. Open the battery
cover and remove the batteries to set the DIP switch.
• Short range (1 m): Move the DIP switch down.
• Longer range: Move the DIP switch up
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Appendices
Appendices
.
Advertisement
Table of Contents
