Cisco Codec C20 Reference Manual page 138

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Network CDP DeviceId
Identifies the name of the switch in form of a character string.
Value space of the result returned:
<String>
example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
xStatus Network CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
<String>
example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
xStatus Network CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network operators
to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
<String>
example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network CDP VTPMgmtDomain
Returns the switch's configured VTP management domain name-string.
Value space of the result returned:
<String>
example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xStatus Network CDP Address
xStatus Network CDP PrimaryMgmtAddress
xStatus Network CDP SysName
xStatus Network CDP SysObjectID
138
xCommand
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
Returns the management address used to configure and monitor the switch the endpoint is connected to.
Value space of the result returned:
<String>
example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.