Cisco Codec C20 Reference Manual page 159

Telepresence system
Hide thumbs Also See for Codec C20:
Table of Contents

Advertisement

Cisco TelePresence System Codec C20
Contents
Introduction
xStatus Video Layout Site [1..n] Output [1..2] FamilyName
Shows the name of the video layout family.
Value space of the result returned:
<String>
example:
xStatus Video Layout Site 1 Output 1 FamilyName
*s Video Layout Site 1 Output 1 FamilyName: "fullscreen"
** end
xStatus Video Layout Site [1..n] Output [1..2] FullFamilyName
Shows the name, included information about selfview on/off, for the video layout family.
Value space of the result returned:
<String>
example:
xStatus Video Layout Site 1 Output 1 FullFamilyName
*s Video Layout Site 1 Output 1 FullFamilyName: "fullscreen-local-single-camctrl"
** end
xStatus Video Layout Site [1..n] Output [1..2] GraphicName
Shows the name of the graphic layout. The name identifies the layout used right now at the specified
output.
NOTE: Note that while the FamilyName is constant as the long as the configurations on the system does
not change, the GraphicName varies depending on system state (the number of participants for instance).
Value space of the result returned:
<String>
example:
xStatus Video Layout Site 1 Output 1 GraphicName
*s Video Layout Site 1 Output 1 GraphicName: "full-pip"
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API
xConfiguration
159
xCommand
xStatus Video Layout Site [1..n] Output [1..2] Frame [1..6] PositionX
Shows the horizontal position of the upper left corner of the frame.
Value space of the result returned:
<0..10000>
example:
xStatus Video Layout Site 1 Output 1 Frame 1 PositionX
*s Video Layout Site 1 Output 1 Frame 1 PositionX: 0
** end
xStatus Video Layout Site [1..n] Output [1..2] Frame [1..6] PositionY
Shows the vertical position of the upper left corner of the frame.
Value space of the result returned:
<0..10000>
example:
xStatus Video Layout Site 1 Output 1 Frame 1 PositionY
*s Video Layout Site 1 Output 1 Frame 1 PositionY: 0
** end
xStatus Video Layout Site [1..n] Output [1..2] Frame [1..6] Width
Shows the width of the frame.
Value space of the result returned:
<0..10000>
example:
xStatus Video Layout Site 1 Output 1 Frame 1 Width
*s Video Layout Site 1 Output 1 Frame 1 Width: 10000
** end
xStatus Video Layout Site [1..n] Output [1..2] Frame [1..6] Height
Shows the height of the frame.
Value space of the result returned:
<0..10000>
example:
xStatus Video Layout Site 1 Output 1 Frame 1 Height
*s Video Layout Site 1 Output 1 Frame 1 Height: 10000
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents