Cisco Codec C20 Reference Manual page 154

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SystemUnit State NumberOfActiveCalls
Shows the number of active calls.
Value space of the result returned:
<0..5>
example:
xStatus SystemUnit State NumberOfActiveCalls
*s SystemUnit State NumberOfActiveCalls: 0
** end
xStatus SystemUnit State NumberOfSuspendedCalls
Shows the number of suspended calls.
Value space of the result returned:
<0..5>
example:
xStatus SystemUnit State NumberOfSuspendedCalls
*s SystemUnit State NumberOfSuspendedCalls: 0
** end
xStatus SystemUnit State NumberOfInProgressCalls
Shows the number of calls in progress.
Value space of the result returned:
<0..5>
example:
xStatus SystemUnit State NumberOfInProgressCalls
*s SystemUnit State NumberOfInProgressCalls: 0
** end
xStatus SystemUnit State Subsystem Application
Shows the status of the sub system application.
Initialized: The sub-system application is initialized.
Initializing: The sub-system application is initializing.
Value space of the result returned:
<Initialized/Initializing>
example:
xStatus SystemUnit State Subsystem Application
*s SystemUnit State Subsystem Application: Initialized
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
154
xCommand
xStatus SystemUnit ContactInfo
Shows the address which another system can dial to reach this system.
Value space of the result returned:
<String>
example:
xStatus SystemUnit ContactInfo
*s SystemUnit ContactInfo: "firstname.lastname@company.com"
** end
xStatus SystemUnit Notifications Notification [1..n] Type
Lists the system notification types. Notifications are issued e.g. when a system is rebooted because
of a software upgrade, or when a factory reset is performed.
FactoryResetOK: This value is returned after a successful factory reset.
FactoryResetFailed: This value is returned after a failed factory reset attempt.
SoftwareUpgradeOK: This value is returned after a successful software upgrade.
SoftwareUpgradeFailed: This value is returned after a failed software upgrade attempt.
RebootRequired: This value is returned when a reboot is required.
Other: This value is returned for any other notifications.
All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications
RemoveAll command.
Value space of the result returned:
<FactoryResetOK, FactoryResetFailed, SoftwareUpgradeOK, SoftwareUpgradeFailed, RebootRequired,
Other>
example:
xStatus SystemUnit Notifications Notification 1 Type
*s SystemUnit Notifications Notification 1 Type: SoftwareUpgradeOK
** end
xStatus SystemUnit Notifications Notification [1..n] Text
Lists text related to important system notifications. Notifications are issued e.g. when a system was
rebooted because of a software upgrade, or when a factory reset has been performed.
All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications
RemoveAll command.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Notifications Notification 1 Text
*s SystemUnit Notifications Notification 1 Text: "OK"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.