Cisco Codec C20 Reference Manual page 152

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SystemUnit Hardware Module SerialNumber
Shows the serial number of the hardware module in the codec.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Hardware Module SerialNumber
*s SystemUnit Hardware Module SerialNumber: "F9AA99A00090"
** end
xStatus SystemUnit Hardware Module Identifier
Shows the revision of the hardware module in the codec.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Hardware Module Identifier
*s SystemUnit Hardware Module Identifier: "1"
** end
xStatus SystemUnit Hardware Module CompatibilityLevel
The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The endpoints
running TC software are manufactured with a new version of the flash memory. Endpoints having the new
version of the flash memory must run software TC4.2.1 or later. Some previous TC software versions
are updated to support the new flash memory. Please check the release note to find if the new version
of the flash memory is supported. If your endpoint does not have the CompatibilityLevel command it
does not have the new flash memory installed.
The result returned when running the command is either 0 or 1:
0 = The system does not have the new flash memory installed.
1 = The system has the new flash memory installed. If downgraded, it can only be downgraded to previ-
ous TC software versions having support for the new version of the flash memory.
Value space of the result returned:
<"1"/"0">
example:
xstatus SystemUnit Hardware Module CompatibilityLevel
*s SystemUnit Hardware Module CompatibilityLevel: 1
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xStatus SystemUnit Hardware MainBoard SerialNumber
xStatus SystemUnit Hardware MainBoard Identifier
xStatus SystemUnit Hardware BootSoftware
xStatus SystemUnit Hardware MonitoringSoftware
152
xCommand
Shows the serial number of the main board in the codec.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Hardware MainBoard SerialNumber
*s SystemUnit Hardware MainBoard SerialNumber: "PH0999989"
** end
Shows the revision of the main board in the codec.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Hardware MainBoard Identifier
*s SystemUnit Hardware MainBoard Identifier: "101400-5 [06]"
** end
Shows the version of the boot software that is installed on the codec.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Hardware BootSoftware
*s SystemUnit Hardware BootSoftware: "U-Boot 2010.04-30"
** end
The feedback shows the monitoring software id.
Value space of the result returned:
<String>
example:
xstatus SystemUnit Hardware MonitoringSoftware
*s SystemUnit Hardware MonitoringSoftware: "39"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.