Removing Crop Dividers From Storage - MacDon D65 Assembly Instruction Manual
Draper header for windrowers
Hide thumbs
Also See for D65:
- Operator's manual (310 pages) ,
- Installation instructions manual (74 pages) ,
- Assembly instructions manual (44 pages)
Table of Contents
Advertisement
ASSEMBLING HEADER
3.4 Removing Crop Dividers from Storage
Crop dividers are shipped attached to inboard side of endsheets. To remove crop dividers, follow these steps:
1. Open endshields. Refer to
3.3 Opening Endshield, page
25.
2. Support crop divider and remove shipping wire at front
end (A).
3. Remove bolt (B).
4. Remove bolt with washer (C) and retain for installation.
5. Repeat above steps for opposite end.
Figure 3.20: Crop Divider Storage
26
214328
Revision A
Hide quick links:
Advertisement
Table of Contents
