Closing Endshield - MacDon D65 Assembly Instruction Manual

3.7 Closing Endshield

1. Maintain forward pressure and swing the rear of the
endshield towards the header.
2. Lift the endshield and engage pin (A) located on the top
of the endsheet frame with the hole in endshield (B).
3. Push in the endshield to engage lower latch (A).
4. Use tool (B) to lock lower latch (A).
5. Replace tool (B) and lynch pin (A) on top pin (C).
214328
ASSEMBLING HEADER
Figure 3.26: Left Endshield
Figure 3.27: Left Endshield
Figure 3.28: Left Endshield Pin
29
Revision A