Seat alhambra Owner's Manual page 225

Number plate light
• Unscrew lens.
• Pull defective glass based bulb out of bulb holder and insert new
bulb.
• Do not overtighten lens. Ensure that the seals are properly
located.
• Insert lens in the tailgate opening, ensure that the rubber seal
and the light are correctly positioned (see adjacent light).
• Do not overtighten the lens screws.
Safety First
AL0-062
Fig. 188
K
Controls and equipment
Interior light
• Insert a knife or similar in the gap between housing and lens
(arrow) and carefully lever lens off.
• Exchange bulb.
• Press lens back into housing.
Tips and Maintenance
If and when
Fig. 189
B7M-0018
K
Technical Data
221