Seat alhambra Owner's Manual page 216

212 If and when
C C a a u u t t i i o o n n
Carry out wheel change on as flat a surface as possible.
• Take the tools out of the vehicle.
• Take spare wheel out of bracket.
• To remove wheel trim:
– Remove wheel bolt caps.
– Remove hub cap or wheel trim with the wheel spanner and the
K
wire hook.
Wheel trims
• Push the wheel spanner as far as possible onto the wheel bolt
fig. 176 and turn the spanner anti-clockwise. When doing this, grip
the spanner as far as possible towards the lever end.
B45-082C
Fig. 176
⇒
If the bolts cannot be loosened, one can in an emergency, carefully
push the spanner down with a foot on the end of the lever. One
should ensure that one has a firm stance and a good grip on the
vehicle.
Loosen wheel bolts about one turn.
Refer to page 214 for notes on loosening the anti-theft wheel
K
bolts*.
Raising the vehicle
AL0-0137
Fig. 177